Most individuals find pleasure in camping, where they go into the natural environment to have fun or an adventure. Nonetheless, one of the tasks they often find challenging is starting a campfire.
A campfire that provides heat, light, and a means of cooking is vital in any camp or when sleeping outdoors. However, starting one can be a little challenging if you do not have the right tools for the job.
Luckily, with the following essential tools of survival discussed below, it is simple to set a fire and enjoy the privileges of a campfire.
1. Pull/Start/Fire Fire Starter
The Pull/Start/Fire Fire Starters are one of the most convenient and efficient tools for starting a fire while camping. It is basically used for situations like camping, backyard gatherings, or in an emergency.
This fire starter is small and weighs only 4oz as it is just 1x2x5 inches long with a thickness of ¼ inch.
How to Use
The Pull Start Fire is easy to use and does not need any preparation; it can burn even if the wood is wet, thus becoming efficient in complex conditions.
All you have to do is pull the red string, and it burns 2. 5 times hotter than standard fire starters for at least 40 minutes, which is long enough for your log to catch fire.
Pro Tip
Pull/Start/Fire Fire Starter is water resistant and withstands any weather; this particular fire can be sustained even in winds up to 200. This makes its performance more reliable, especially in cold or hot environments.
However, make sure always to take precautions while lighting the fire starter, peel off the plastic cover before using it, and keep water or fire extinguisher handy at all times.
2. Firesteel (Ferrocerium Rod)
There is nothing quite like having a ferrocerium rod, also commonly referred to as fire steel, for igniting a campfire. Ferrocerium rods are small and lightweight, but they can produce sparks that are up to 3000°C (5,432°F) in wet and dry environments.
How to Use
The firesteel is made up of a metal rod and a flint. When struck against the striker, the rod is capable of producing sparks, which, if hot enough, will ignite tinder.
In order to effectively utilize this tool, place your tinder, like dry leaves, grass or birch bark, near the rod. With the tip of the firesteel, make an angle over the tinder and move the striker up and down to produce the sparks.
It might require a few sparks to light the tinder successfully, but once it has caught fire, one will see a small flame, which can easily be blown into a large fire.
Pro Tip
Make sure that you collect enough delicate, dry, and combustible material, commonly referred to as tinder. For better results in wet conditions, it is recommended to use tree bark or cotton balls that have been dipped in petroleum jelly.
3. Magnesium Block
A magnesium block is small and very flammable, usually accompanied by a built-in striker. The burning temperature of magnesium is very high, about 1400 degrees Celsius, which is over 3,000°F; hence, it is used to ignite damp or stubborn tinder.
How to Use
To ignite a magnesium block, make small shavings from the block and place them on your tinder using a knife or a scraper that can be found in its handle.
Then, using the striker side of the block, set the magnesium pile on sparks. The magnesium shavings would burn immediately, and you will get a hot spark that can be used to ignite the tinder.
Pro Tip
It is essential to have a sufficient amount of magnesium shavings for a roll before initiating the strike.
4. Flint and Steel
Flint and steel are still some of the oldest known fire-starting tools and date back many centuries.
This tool comes in handy for people who wish to use products that are exceedingly sturdy and long-lasting when igniting a fire. Flint is a rock that generates sparks when brought into contact with a piece of steel.
How to Use
Hold the steel in one hand and the flint in the other to employ the two materials. To create sparks, strike the flint on the steel in a downward motion.
Your tinder will ignite if you hold the sparks near it. Although it may need some experience, this approach is quite dependable when appropriately used.
Pro Tip
Make sure your flint is sharp, and to get better sparks, aim toward the steel’s edge. The sparks from steel and flint may be swiftly captured using char cloth, a fabric that has been burnt into charcoal.
5. Survival Matches
Survival matches, sometimes referred to as stormproof matches, are made to remain lighted even under the most adverse circumstances. They are waterproof and windproof and make a great backup item for your survival pack.
How to Use
Just strike a survival match against the included striker and hold the lighted match to your tinder to start a fire. These matches will burn long enough to light your tinder, providing you with a dependable fire-starting method even in windy or wet weather.
Pro Tip
Keep many packs of survival matches on hand in case of crises, and always keep them in a waterproof container. For reliable fire starting, combine them with a solid tinder source, such as cotton soaked in wax or a fire starter cube.
Bottomline
Making a fire using simple survival gear is vital, as survival circumstances sometimes need rapid thinking and inventiveness.
Gaining proficiency with these tools will enable you to create a fire in any situation, providing warmth, safety, and the ability to boil water or prepare meals outside.
Before your next journey, take some time to get proficient with those tools since, like any survival skill, practice makes a man perfect!
Read more– Click here
